SSAT-2L "AIR TIGER"
Dry recovery

II 2 G/D EEx c IIC T6 (85°C)

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• HEPA filter.
• Stainless steel AISI 304 construction.
• For dry recovery only.
• Complete kit with tools and accessories in sturdy case
• Brochure
• Tools and accessories (PDF)
• Declaration of conformity.

SSAT-2L-6L
Dry recovery

II 2 G/D EEx c IIC T6 (85°C)

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• HEPA filter.
• Stainless steel AISI 304 construction.
• For dry recovery only.
• Complete kit with tools and accessories in sturdy case
• Brochure
• Tools and accessories (PDF)
• Declaration of conformity.

SS-10 4W (RE) HEPA
For potent powder recovery (dry)

0081 II 2 G/D EEx c IIC T6 (85°C)
LCIE 03 ATEX 6310

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• Cleanroom and Pharma compatible
• Specifically designed for the safe recovery of potent compounds and powders.
• Primary internal and secondary external HEPA Filtrers as part of a 5-stage filtration system.
• Safe HEPA filter change.
• All stainless steel AISI 304 construction (except tilt cart).
• For dry recovery.
• Brochure
• Declaration of conformity.

SS-10 to 55 RE Series
Wet and dry recovery

0081 II 2 G/D EEx c IIC T6 (85°C)
LCIE 03 ATEX 6310

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• HEPA/ULPA filter.
• Middle Ring with Activated Carbon (MRAC) available for wet and dry recovery (SS-10 only).
• Available with an Interceptor unit on a single cart (SS-25 only)
• All stainless steel AISI 304 construction (except tilt cart).
• For wet and dry recovery.
• Based either on a 4 wheel dolly or on a 4 wheel tilting cart to allow for easy emptying of recovered materials.
• Brochure
• Interceptor unit: Brochure
• Declaration of conformity.

SS-20L DT
Dry recovery

0081 II 2 G/D EEx c IIC T6 (85°C)
LCIE 03 ATEX 6310

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• HEPA filtration.
• Equipped with Manual Filter Shaker (MFS).
• Stainless steel AISI 304 construction (except tilt cart).
• For dry recovery only.
• Detachable recovery tank (DT).
• Brochure
• Declaration of conformity.

SS-15/40 EX RE HEPA
Automatic filtration systems, dry recovery

0081 II 2 G/D EEx c IIC T6 (85°C)
LCIE 03 ATEX 6310

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• HEPA/ULPA Filtration available.
• Available with Automatic Filter Shaker (AFS) or Reverse Pulse System (RPS).
• All Stainless Steel AISI 304 Construction (AISI 316L Electropolished available).
• For dry recovery (liquids can be recovered into a separate Immersion recovery tank).
• Declaration of conformity.

SS-40L RE HEPA
Dry Recovery

0081 II 2 G/D EEx c IIC T6 (85°C)
LCIE 03 ATEX 6310

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• HEPA filter included
• Stainless steel AISI 304 construction.
• Detachable recovery tank (DT).
• For dry recovery only.
• Brochure
• Declaration of conformity.

SS-35L RE HEPA Series
Dry recovery

0081 II 2 G/D EEx c IIC T6 (85°C)
LCIE 03 ATEX 6310

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• Stainless steel AISI 304 construction.
• Available with Manual Filter Shaker (MFS) or Manual Reverse Purge (MRP)
• Detachable recovery tank (DT).
• For dry recovery only.
• Brochure (MFS)
• Brochure (MRP)
• Declaration of conformity.

SS-IT EX (HY-C) HEPA
Wet and Dry recovery

0081 II 2 G/D EEx c IIC T6 (85°C)
LCIE 03 ATEX 6310

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• HEPA filter included
• For the recovery and neutralization of conductive and explosive dust into a liquid bath.
• Hydraulic cart for easy emptying
• Stainless steel AISI 304 construction.
• For wet and dry recovery only.
• Brochure

TVSS-63L EX (MRP)
RE HEPA
Dry recovery

0081 II 2 G/D EEx c IIC T6 (85°C)
LCIE 03 ATEX 6310

• Meets the requirements for:
  Class I – Groups C and D
  Class II – Groups E, F and G.
• HEPA Filter
• Stainless steel AISI 304 construction.
• Manual Reverse Purge (MRP)
• Single or twin Venturi
• Detachable recovery tank (DT).
• For dry recovery only.
• Brochure